{"title":"Kitchen Mixer Taps","description":"\u003cp\u003eMonobloc sink mixers that drop into a single 35mm tap hole and blend hot and cold through one spout. The range covers plain swan-neck mixers, twin-lever models and pull-out spray versions, in chrome and brushed steel.\u003c\/p\u003e\u003cp\u003eA mixer is the default choice for a modern kitchen because it gives you one spout to fill and rinse under, and a swivel so you can move it clear of the bowl when you are working. Spout height matters more than people expect — a tall swan neck makes filling stockpots and vases far easier, but needs headroom if your sink sits under a window.\u003c\/p\u003e\u003ch2\u003ePoints worth checking\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSpout reach: measure from the tap hole to the centre of the bowl so the water lands where you want it.\u003c\/li\u003e\n\u003cli\u003eSwivel range: 360° is useful over a double bowl, 180° is fine for a single.\u003c\/li\u003e\n\u003cli\u003eHandle position: side-lever models are easier to reach when the tap sits tight against a wall.\u003c\/li\u003e\n\u003cli\u003eFinish: brushed steel hides water marks better than polished chrome in a hard water area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlso in this range: \u003ca href=\"\/collections\/kitchen-taps\"\u003eall kitchen taps\u003c\/a\u003e, \u003ca href=\"\/collections\/pull-out-kitchen-taps\"\u003epull-out spray taps\u003c\/a\u003e and \u003ca href=\"\/collections\/twin-lever-kitchen-taps\"\u003etwin lever kitchen taps\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\u003ch3\u003eWhat is a monobloc kitchen tap?\u003c\/h3\u003e\u003cp\u003eA monobloc tap is a single unit that fits through one hole in the sink or worktop and carries both the hot and cold feeds internally, mixing them before they reach the spout. It is the standard fitting on modern kitchen sinks.\u003c\/p\u003e\u003ch3\u003eAre these taps suitable for a low pressure system?\u003c\/h3\u003e\u003cp\u003eSome are and some are not, so check the water pressure figure on the individual product page. Gravity-fed systems with the cold tank in the loft often sit below 0.5 bar at the tap, which is not enough for every mixer.\u003c\/p\u003e","products":[],"url":"https:\/\/tilesparadiseuk.com\/collections\/kitchen-mixer-taps.oembed","provider":"TILES Paradise","version":"1.0","type":"link"}