43%
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Iceland Navy Blue Marble Effect Gloss Porcelain 60x120cm Wall & Floor Tile
Iceland Navy is the statement colour of the range — a deep, saturated navy blue marble shot through with pale, almost white veining, under a mirror-bright ultra gloss face. It has the drama of a rare blue marble like Azul Macaubas or Sodalite at a fraction of the cost, and because it is a 60x120cm tile the veins sweep across the surface uninterrupted rather than being chopped at every joint. In gloss, the dark ground turns into a mirror and reflects light back into the room, which is what stops a navy bathroom from feeling like a cave.
- Made in Spain by Ecoceramic — imported directly by us
- Size: 60x120cm large format rectangular porcelain, 10mm thick
- Finish: Ultra gloss, marble effect
- Colour: Deep navy blue with pale veining
- Rectified edges for a tight 2mm joint and a near-seamless finish
- 2 tiles per box, covering 1.44m² (approx. 33kg per box)
- Suitable for interior walls and floors, and for use over underfloor heating
- Sold per square metre — free sample available
Where it works
A feature wall behind a freestanding bath or vanity, a full shower enclosure against white walls, a cloakroom clad floor to ceiling, a bar or kitchen splashback run in one line. Brushed brass and gold fittings look expensive against it; so does a white marble like Iceland White on the remaining walls.
Frequently Asked Questions
Is this a polished tile?
No — it is an ultra gloss glazed porcelain. The shine is a high-gloss glaze fired onto the surface, so the tile is sealed and non-porous from the start and needs no treatment before or after installation.
Will a dark gloss show water marks?
More than a grey will — that is the trade-off with any dark gloss. On a shower wall a quick squeegee after use keeps it spotless; in a cloakroom or on a feature wall it is a non-issue. The pale veining breaks the surface up and hides far more than a plain navy gloss would.
What preparation does a 60x120cm tile need?
A flat, stable substrate, a large-format flexible adhesive, full back-buttering and a levelling clip system. Use a dark grey or navy grout rather than white — white grout lines turn a marble wall back into a grid.
Can I use it on a bathroom floor?
On walls and dry floors, yes. Gloss is slippery when wet, so keep a matt or anti-slip tile in the shower tray area.
Compare with: Iceland White 60x120cm · Iceland Topaz Grey 60x120cm
Explore more 60x120cm large format tiles, blue wall tiles and marble effect tiles.
- Finish: Gloss
- Floor or Wall: Both
- Size: Large (60x120cm)
- Rectified: Yes
- Suitable for Underfloor Heating: Yes
- Box Quantity: 2
- Sale By: Per Sqm
- Shape / Design: Marble Effect
Help choosing
- Size60x120cm
- FinishGloss
- MaterialPorcelain
- Use onFloor & Wall
- RectifiedYes
- Underfloor heatingYes
- Check where it can go. Floors need a tile rated for floors. In showers and wet rooms, a matt or anti-slip finish is safer underfoot than polished.
- Measure and add 10%. Length x width for each area, added together, plus 10% for cuts and breakage (15% for herringbone or diagonal layouts). The calculator above does this for you.
- Pick your joint. This tile is rectified (precision-cut edges), so a slim 2mm joint gives a near-seamless look. Large tiles need a flat surface; levelling clips help.
- Order it all together. Tiles are made in batches that can vary slightly in shade, so buy the full amount in one order.
- See it first. Order a sample to check the colour and finish in your own light.
Still not sure? Send us your measurements and we'll check for you.
